Skip to the page for the link.

HOMEProductsFilms for ConvertingBONYL-S™

BONYL-S™

Characteristics

The BONYL™-S is a nylon film that shrinks in hot water. Combined with PE or other sealant film, it is suitable for applications in which shrinkage is required concurrently with hot water sterilization. Since it may not shrink under the normal condition, it can be printed or laminated under the same conditions as for general nylons.

Examples of Applications

Chub packages for meat, wild vegetables, tokoroten jelly strips, tofu and other food and lid

Grades

Type Thickness(µm) Treated Surface Characteristics
SC 15 inside corona Shrinkage: 23% in hot water at 100°C for 30 minutes
SS 15 inside corona Shrinkage: 5% in hot water at 100°C for 30 minutes

Shrinkage properties of the BONYL™-SC and the BONYL™-SS

Properties

Properties of the BONYL™-SC (in single film)

Item Unit Measuring Method BONYL™-SS BONYL™-RX
Thickness µm Dial gauge 15
Tensile strength MD MPa Compliant with JIS Z 1704 300 250
TD 320 290
Tensile elongation MD % Compliant with JIS Z 1704 125 120
TD 110 110
Impact strength J per sheet Film impact tester 1.6 1.6
Coefficient of friction Static - Compliant with ASTM D 1894 0.92 0.35
Dynamic 0.92 0.35
Haze % JIS K 7105 1.9
Wetting tension (treated) mN/m JIS K 6768 54
Hot water shrinkage ratio MD % Dip in hot water 100°C×30minutes 22.5 2.3
TD 23.6 2.2

Note: The data presented herein are typical values.

Properties of the BONYL™-SS (in single film)

Item Unit Measuring Method BONYL™-SC BONYL™-RX
Thickness µm Dial gauge 15
Tensile strength MD MPa Compliant with JIS Z 1704 260 250
TD 320 290
Tensile elongation MD % Compliant with JIS Z 1704 120 120
TD 110 110
Impact strength J per sheet Film impact tester 1.6 1.6
Coefficient of friction Static - Compliant with ASTM D 1894 0.80 0.35
Dynamic 0.84 0.35
Haze % JIS K 7105 1.9
Wetting tension (treated) mN/m JIS K 6768 54
Hot water shrinkage ratio MD % Dip in hot water 100°C×30minutes 5.0 2.3
TD 5.0 2.2

Note: The data presented herein are typical values.

page top